Template
Question/Answers
 
Question
Answer
Score
Value
Sequence
Answer
 
Company and Site Information - Company Name Trinity   1.1 Trinity
Company and Site Information - Site Location West Area 12   1.2 West Area 12
Contacts - Name of Competent Person On Site Tom Jones   2.1 Tom Jones
Contacts - Name of Person Conducting Audit Scott Burday   2.2 Scott Burday
Site Details - Type of Structure Monopole   3.1 Monopole
Site Details - Scope of Work Site audit   3.2 Site audit
Site Details - What is the current wind MPH? 12   3.3 12
Site Details - What is the current temperature (degrees F)? 63   3.4 63
PART 1: JOB SITE DOCUMENTATION - A1. Was a Job Hazard Analysis (JHA) documented and prepared prior to the commencement of the project? Yes 1.00 4.1 Yes
PART 1: JOB SITE DOCUMENTATION - A2. Was the JHA updated whenever there were changes to tasks or hazards during the construction process and readily accessible at the jobsite at all times? Yes 1.00 4.2 Yes
PART 1: JOB SITE DOCUMENTATION - A3. If conventional guy anchors are present, has the structure owner been contacted or the NATE Anchor Corrosion Guidelines been evaluated by the competent person? N/A 0.00 4.3 N/A
A. Are the housekeeping responsibilities met and maintained? Yes 1.00 5 Yes
B. Are measures taken to prevent access by authorized & unauthorized personnel to the site or hazard? Yes 1.00 6 Yes
Are personnel on site working at elevation? (If YES, you will be asked a series of questions about this area.  If NO, you will automatically be taken to PART 5) Yes 1.00 7 Yes
PART 4: FALL PROTECTION AND RESCUE EQUIPMENT - A. Is a documented fall protection plan that includes a site-specific rescue plan readily available at the jobsite? Yes 1.00 7.6 Yes
PART 4: FALL PROTECTION AND RESCUE EQUIPMENT - B. Is fall protection equipment inspected and documented daily before use? No 0.00 7.7 No
PART 4: FALL PROTECTION AND RESCUE EQUIPMENT - C. Is fall protection PPE used according to applicable standards and manufacturer requirements? Yes 1.00 7.8 Yes
Overall Impression of Visit ABOVE AVERAGE 2.00 8 ABOVE AVERAGE
Supervisor Signature   9  
TOT     9.00    
AVG     0.47    
Other Information
11-04-2024 03:30 PM
11-04-2024 03:33 PM
3.08 mins
 
Created on Nov.  4, 2024 at  3:33 PM (CST). Owned by Anonymous.
Anonymous
Show fields from Show fields from Show fields from a related table
Report Name *
Description
Reports and Charts Panel
Each table has a panel listing its reports and charts, organized in groups.
Please wait while your new report is saved...
Field label
Column heading override
Justification
What does auto mean?
Fields in:

Fields to Extract:
Name for the new table:
Items in the new table are called:

When you bring additional fields into a conversion, Quickbase often finds inconsistencies. For example, say you're converting your Companies column into its own table. One company, Acme Corporation, has offices in New York, Dallas and Portland. So, when you add the City column to the conversion, Quickbase finds three different locations for Acme. A single value in the column you're converting can only match one value in any additional field. Quickbase needs you to clean up the extra cities before it can create your new table. To do so, you have one of two choices:

  • If you want to create three separate Acme records (Acme-New York, Acme-Dallas and Acme-Portland) click the Conform link at the top of the column.
  • If the dissimilar entries are mistakes (say Acme only has one office in New York and the other locations are data-entry errors) go back into your table and correct the inconsistencies—in this case, changing all locations to New York. Then try the conversion again.

Read more about converting a column into a table.